1. Before using the slitting machine, all potential safety hazards in the operation site should be eliminated. At the same time, pay attention to check whether all the data of the slitting machine are normal. In addition, check whether the voltage and current of the machine are stable, and it must be kept in a normal state before it can be turned on for work.
2. Turn on the power switch of the hydraulic system of the slitter, and check whether the oil level and pressure gauge display of the main hydraulic drive system are correct and stable. Next, open the pneumatic shut-off valve of the slitter to check whether the air pressure is normal and stable.
3. The setting control of the paper tube machine of the slitter, and the slitting menu is set according to the film type, thickness, length, width, etc. arranged in the slitting plan sheet. Then lift the corresponding BOPP film file from the PDF.
4. Set the winding length and width of the corresponding specification film for the slitting machine operating system. And select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of the corresponding specification.
5. After preparing the above work, it is necessary to feed the slitter and wear the film. After doing these things carefully, it will be the work of starting up and using the slitting machine.
When using the slitting machine, it is necessary to operate carefully, carefully and strictly according to the above process, which is not only beneficial to the production operation of the slitting machine, but also has a certain guarantee for the personal safety of the operators.
