1. The slitting machine needs to slit the whole roll or the whole raw material to a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., all of which need to use fixed-length slitting control .
2. Fixed-length slitting control is divided into two types: static and dynamic slitting: when the set length is reached, it will stop accurately, then static slitting and processing, and restart after slitting; when the set length is reached, it will not stop and send out Slitting signal, the slitting machine dynamically slitting and processing during the material movement.
3. The most important performance index of fixed-length slitting is the slitting accuracy, and the length of the finished product is consistent.
4. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
Not only does the slitter have operating process requirements, but the rewinder and napkin machine also have corresponding process requirements. Every employee who operates these machinery and equipment must undergo these trainings before taking up the job, so as to reduce the probability of accidents. In production and processing, whether it is manpower or mechanical operation, we are more concerned about its work efficiency, because good efficiency can not only improve productivity for the processing and manufacturing side, but also save costs. Therefore, when purchasing a slitter, pay more attention to its working performance and quality. However, when it comes to the working efficiency of the slitting machine, many people think that the working efficiency of the slitting machine is only related to the speed of the slitting machine. In fact, it is not the case. I think the working efficiency of the slitting machine is related to the following factors: Speed, yield, non-running elapsed time, stability, etc. The slitting speed is certainly an important indicator of the working efficiency of the slitting machine, but if the yield is low, not only will the working efficiency of the whole machine be low, but also the cost will increase.
Similarly, if the non-operation takes a long time, such as: machine adjustment, tool setting, tool change, material change, joint connection, coil change, and problem solving, etc., it is meaningless to simply increase the speed of the slitting machine up. Not to mention the stability of the slitting machine, it will not only affect the working efficiency of the slitting machine, but also affect the product quality, and will cause trouble and unnecessary waste to the next process. So the working efficiency of the slitting machine is a comprehensive concept.
