The general divisions in the sub -cutter are some raw materials for paper and textiles, but the metal splitter is mainly for metal cutting operations. Among them There is still a relatively large difference in cutting. Since metal is not as easy to cut as other materials, there are still a lot of points to pay attention to during the division process.
Section cutter
1. The tool requirements are determined, and the use of operation cannot be contacted by hand.
2. The demand is operated in accordance with the operation process, and the demand is qualified to be on -the -job. When the device is running, it cannot be leaned on any part of the device.
3. The device must not play the control box door at will, and must not use any part of the body to contact the transmission part.
4. The equipment cannot be opened at will after power -on, and it is not allowed to contact the electrical component with your hands. The first is to avoid the injury to the electric shock;
5. The operators should not leave long hair, and need to bring gloves when the equipment is operated.
The above is the point of view of the metal segmentation in the division machine.
