Daily maintenance work of cross cutting machine

The cross-cutting machine can be used for cutting roll materials such as coated paper, coated paper, kraft paper, paper-plastic composites, and plastic sheets, especially for the production of papermaking and paper processing industries. Then, when using the cross-cutting machine, regular maintenance should be carried out, so as to ensure the smooth operation of the machine and the cutting quality of the product.
First of all, the cross-cutting machine should be installed in a place that is dry, ventilated, well-lit, and easy to operate. Secondly, after each operation, it is necessary to clean up the dust and paper scraps on the machine in time, check the knives and grinding wheels, check whether there is any abnormality in the running parts, and add lubricating oil reasonably. Arrange the water accumulated in the oil-moisture elevator and the gas storage tank side by side. Finally, cut off the power supply of the cross-cutting machine according to the operation requirements of the manual, and maintain the computer operating system.
The above is the basic daily maintenance work of the cross-cutting machine. The general principle is that the inspection, cleaning, and lubrication maintenance work is in place to ensure that all parts of the equipment are in good condition. In addition, it is also very important to improve the technical quality and level of the operators. For the operation of the control part, a special person should be responsible, and no one can operate without permission.